DIY How To - Hardware Troubleshooting - In What Way Or Manner to fix your own laptop hardware errors.

Ordinarily a machine that will not power-up could have inadvertently come to be unplugged or conceivably a cable may have come to be loose. The following checklist is intended to eliminate a power connection or disconnected cord as the origin for a system not powering up.

* analyze to be positive that all power switches are in the on placement. Analyze the back of the home computer case. Many times there will be a power switch on the back of the computer alongside the spot where the power cable attaches to the desktop computer. Be confident that it is in the correct placement.
* Check to see that the voltage switch is set correctly. In the U.S. it should be set to 110v/115v. You will find the voltage switch situated on the power supply, which is ordinarily situated on the back of the laptop computer also near the power cable.
* Make positive that the power cable to the computer is plugged tightly into the rear of the computer.
* For laptops make satisfied that the transformer is plugged into the laptop solidly.
* Trace the power cable from the desktop computer rear to the receptacle in the power strip or wall and make sure that the receptacle is actually ‘hot’. You can test this by taking a known working appliance such as a lamp and testing the actual receptacle that the desktop computer is plugged into to make positive that it is in fact working.
* If you see a power light or other L.E.D.’s on the computer case lighting up but the monitor is not showing a display then you may not have power to the monitor or the video wire may have become disconnected. Make confident that the power wire to the monitor is firmly plugged into the rear of the monitor. Trace the power cable from the monitor back to the receptacle and be sure that it is connected to a live outlet.
* Analyze to see if the monitor video cord is secured to the rear of the monitor and that the other end is solidly coupled to the video port on the personal computer.
* Still no luck? Try unplugging and re-plugging all cables. take off all wires from the laptop including power, monitor, mouse, keyboard, printer, network, and any other attached devices. Make confident that you know where the cables go back again! If not, label them.
* Now re-plug all the cords and cables and try powering up again.
* If you are still experiencing errors please call and speak to one of our officially recognized technicians. 210-260-0045.

Find out how our San Antonio Laptop Repair specialists can help to either upgrage or repair your computer system.